Beschreibung
A true classic, back in a new edition. The Flying Stick is a hybrid 3D-printed + foam RC airplane with a 120 cm wingspan — quick, affordable and easy to build. A complete build, electronics included, should come in under €100.
The airframe combines 3D-printed parts with 3 mm XPS/Depron foam. All printed components use affordable PETG; ABS is recommended for the landing-gear mounts for extra durability. Most parts print support-free at 20% grid infill.
Specifications
| Wingspan | 120 cm |
|---|---|
| Ready-to-fly weight | ~0.9 kg |
| Motor | C2836-1120KV (example) |
| Propeller | 10×5 |
| ESC | 30 A |
| Servos | 4× 9 g |
| Battery | 3S or 4S Li-Po |
| Material | PETG (ABS landing-gear mounts) |
What's in the download
- STL files
- Build manual
- Sticker / decal designs
Was du zum Bauen & Fliegen brauchst
| Teil | Anz. | Kaufen bei: |
|---|---|---|
| XPS Depron — 3 mm sheets (min 60 cm long) | ||
| 10×10 mm aluminum / carbon tube | 1 Stk. | |
| 2.5 mm steel rod (landing gear) | 1 Stk. | |
| 2 mm steel rod | 1 Stk. | |
| 1 mm steel rod (pushers) | 1 Stk. | |
| 0.5–0.8 mm steel rod (hinges) | 1 Stk. | |
| M3 × 12 mm screw + nut | 1 Stk. | |
| Landing-gear wheel collar — 2.5 mm | 2 Stk. | |
| Landing-gear wheel collar — 2 mm | 1 Stk. | |
| Motor — C2835-1200kv or similar (trainer) | 1 Stk. | |
| Propeller — 9×6 | 1 Stk. | |
| ESC — 30 A | 1 Stk. | |
| Servos — 9 g | 4 Stk. | |
| Li-Po battery — 3–4S (depends on motor; I use 2200 mAh) | 1 Stk. |
Diese Bauteile verkaufe ich nicht in meinem Shop — die Links führen zu externen Marktplätzen (Affiliate).
Community
Folge mir
Bleib auf dem Laufenden
Newsletter
aus der Werkstatt.
Ein paar Mal im Jahr sende ich Neuigkeiten, Baufotos
und Notizen von meiner Arbeit an kommenden Modellen.
Kein Spam · Jederzeit abbestellbar
Einen Blick wert
