Flying Stick 120cm – Hybrid 3D printed + XPS/Depron foam RC plane

Flying Stick 120 cm
Classics in a new edition. Build your model quickly and inexpensively.
The cost of the entire build should not exceed 90 euros including electronic components.

Model prepared for 3D printing and covered with XPS (depron) foam or similar material with a thickness of 3mm.
All parts can be printed using cheap PETG filament.
Some parts, such as the chassis mount, if you have the opportunity, print using ABS filament.

Print specifications:
Most parts can be printed without supports.
Filling: 20%
Fill type: grid

Aircraft specifications:
Wingspan: 120cm
Ready-to-fly weight: about 0.9kg
Motor: e.g. C2836-1120kv
Propeller: 10×5 (depending on the motor)
ESC: 30A
Servos: 4x 9g
Li-Po battery 3-4S (depending on the motor)

ZIP package includes:
– STL files
– build manual
– stickers

—
update: 3.03.2024
– added file to set motor angle to 4 deg – download => motor-angle-4-deg.stl
– added sticker files – download => af-flying-stick-001-stickers.zip

update: 27.07.2023
– release

Non 3d printed parts list:

XPS Depron:
3mm sheets (min 60cm long) => https://www.rcdepron.com/depron/5964548210873/usa

LICENSE:
What you can:
– print STL files how many you want
– modifying and add upgrades for yourself

What you can’t:
– sell STL files
– print and sell like your own product
– use this files commercial
– share third person (if you want to share files, just share link to store)

The author of these files does not take responsibility for any damage caused by improper use.